Lakewood Filters, Inc. Products - Filtration Hardware

To assure that your equipment provides the healthiest indoor air and operates as efficiently as possible, LFI uses quality products that provide reliable performance and superior value.

Once an IAQ survey is complete, we will recommend products to fit your specific needs.

Lakewood Filters, Inc. offers you a variety of filtration hardware and cleanroom products.

PURO-SEAL ASHRAE Side Access Filter Housing
The ASA housing is a multistage unit for 2" or 4" prefilters, combined with 1" header models of medium and high efficiency extended surface final filters. Available in multiple sizes and three depths, the 16 gauge galvanized, intermediate welded ASA housing easily accommodates most system types. Several construction options are available.

PURO-SEAL FBA Flat Bank Assembly Filter Housing
The FBA housing is a single stage unit for 2", 4", 6" or 12" medium or high efficiency extended surface final filters. This housing features a 16 gauge galvanized construction with pre-formed filter tracks, corner gussets along the upstream side of the system, intermediate welds and positive lock door latch to increase versatility, integrity and ease of use. Additional construction features and options are available.

PURO-SEAL VBA Vee Bank Assembly Filter Housing
The PURO-Seal VBA housing is a single stage unit for various combinations of 2" and 4" pleated filters. Each housing is constructed of 16 gauge galvanized steel into a one-piece construction. 1" installation flanges are standard on all units with custom flanges available. Corner gussets add strength to the housing while intermediate seam welds with silicone compound seals eliminate air leakage.

PURO-SEAL CSA Carbon Side Access Filter Housing
The PURO-SEAL CSA Carbon Side Access housing is a multi-stage unit for 2" or 4" prefilters combines with 3/4" carbon trays designed to remove gas/vapor contaminants. A broad range of sizes is available to accommodate most system requirements. The housing is constructed of 16-gauge galvanized steel into a one-piece unit. Corner gussets increase durability and intermediate welding and sealing with silicone compound eliminates air leakage.

PURO-SEAL Refillable Carbon Trays
Purolator's refillable carbon trays provide dual filtration for particulate and odor absorption. Carbon trays are available for vapor or liquid phase filtration. Each panel is designed for easy replacement of the carbon media and may be emptied and refilled at regional activation service locations. Carbon trays are available in standard and custom sizes. Standard depth is 3/4" with screen size of 24-gauge diamond expanded carbon steel. The trays are designed to fit the PURO-SEAL CSA Carbon Housing.

PURO-Fan Filter Unit Module
The PURO-Fan Filter Unit Module is a geometrically low profile, self-powered HEPA filter that delivers up to 800 CFM of ultra-clean air. The low profile modular design provides access to areas with limited overhead clearance, and allows Cleanroom users to group in configurations which best suit their needs. The PURO-Fan is ideal for applications requiring cleanliness levels of Class 10 through Class 100,000.

ASHRAE PURO-FRAME/CLIPS
The PURO-FRAME ASHRAE Holding Frame is a 3" frame used to hold filters individually, or in multiple banks. Available in 16 gauge galvanized steel, 304 stainless steel and universal constructions, the PURO-FRAME features de-burred preformed edges, mounting alignment dimples, and flush mitered/welded corners.

PURO-SEAL HSA HEPA Housing
The Purolator HSA crank lock system provides consistent compression and continuous sealing for Commercial & Industrial applications requiring a high level of filtration on .3 micron particles. Factory assembled of 14 gauge galvanized steel into a single piece construction, the HSA is available with or without pre-filter tracks, gasket or fluid seals. The HSA is designed to allow easy access and removal of all pre and final filters.

PURO-SEAL HEPA Holding Frame
The PURO-SEAL PURO-frame HEPA holding frame is available in galvanized or stainless steel construction, fluid or gasket seals. All filters are held in place with individual clips to accommodate a 5 7/8" filter or an 11 1/2" deep filter frame.

PURO-SEAL BBH Bag-In/Bag-Out Housing
Purolator's Bag-In/Bag-Out side access filter housing offers safer replacement of contaminated HEPA filters. Available for gasket or fluid seal applications, the 11 or 14 gauge stainless steel housing features seam welding, smooth air inlet design, and safety filter locking mechanism.